1. 2. 3. material content data sheet sales product name bsc0924ndi issued 28. july 2015 ma# ma001013784 package pg-tison-8-2 weight* 96.44 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 0.495 0.51 0.51 5132 5132 leadframe inorganic material phosphorus 7723-14-0 0.010 0.01 106 non noble metal zinc 7440-66-6 0.041 0.04 426 non noble metal iron 7439-89-6 0.822 0.85 8520 non noble metal copper 7440-50-8 33.360 34.59 35.49 345930 354982 wire noble metal gold 7440-57-5 0.062 0.06 0.06 641 641 encapsulation organic material carbon black 1333-86-4 0.096 0.10 993 plastics epoxy resin - 4.933 5.11 51148 inorganic material silicondioxide 60676-86-0 42.860 44.48 49.69 444442 496583 leadfinish non noble metal tin 7440-31-5 1.122 1.16 1.16 11633 11633 plating noble metal silver 7440-22-4 0.186 0.19 0.19 1926 1926 solder noble metal silver 7440-22-4 0.021 0.02 218 non noble metal tin 7440-31-5 0.017 0.02 175 non noble metal lead 7439-92-1 0.805 0.83 0.87 8344 8737 heat sink clip inorganic material phosphorus 7723-14-0 0.003 0.00 36 non noble metal zinc 7440-66-6 0.014 0.01 144 non noble metal iron 7439-89-6 0.279 0.29 2889 non noble metal copper 7440-50-8 11.312 11.73 12.03 117297 120366 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
